Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

IP http secure-server problems/how to set up

Hello. My supervisor wants to use SDM to manage our 1841 router but with secure access (https). I have already set this up for http access but I am having problems with the secure server command. When I run the command ip http secure-server in Global Configuration mode the IOS tells me "invalid input at marker" and points to secure-server as the problem. I read somehwere that I need to obtain a certificate or generate a rsa key pair with the command "crypto key generate rsa" but this command is not recognized as valid either. Do I need to upgrade my IOS (currently version 12.4 (3i). What am I doing wrong? I just want to enable https access for SDM. Please, any help would be very appreciated.

6 REPLIES

Re: IP http secure-server problems/how to set up

You need an image the has crypto (look for k9 in the image name). Post a show version and we can help you get the right IOS image.

Hope this helps.

New Member

Re: IP http secure-server problems/how to set up

Thanks Collin. Here are my show version results.

CC#show ver

Cisco IOS Software, 1841 Software (C1841-IPBASE-M), Version 12.4(3i), RELEASE SO

FTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Wed 28-Nov-07 18:17 by stshen

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

CC uptime is 8 weeks, 19 hours, 46 minutes

System returned to ROM by power-on

System image file is "flash:c1841-ipbase-mz.124-3i.bin"

Cisco 1841 (revision 7.0) with 114688K/16384K bytes of memory.

Processor board ID FTX1239Z1CD

2 FastEthernet interfaces

1 Serial interface

WIC T1-DSU

DRAM configuration is 64 bits wide with parity disabled.

191K bytes of NVRAM.

495432K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

Re: IP http secure-server problems/how to set up

That version of IOS is no longer available, but the here is a link for the latest stable IOS for the 1841 with crypto. You will have to login to download the software.

http://download-sj.cisco.com/swc/esd/02/crypto/3DES/279119622/contract/c1841-ipbasek9-mz.124-23.bin

New Member

Re: IP http secure-server problems/how to set up

Thanks Collin but my login will not give me access. Cisco tells me "The file or application you are trying to access may require additional entitlement or you are trying to access a file with an invalid name." What do you recommend?

Re: IP http secure-server problems/how to set up

Do you have a valid smartnet contract on the router?

New Member

Re: IP http secure-server problems/how to set up

Sorry but I am knew at this and do not know about Smartnet contracts. My company bought the router a couple of months ago but we did not buy any extras (support, etc.).

1044
Views
0
Helpful
6
Replies
CreatePlease to create content