IPSEC site to site vpn with NAT on one of the tunnel endpointsâ
I am having problems with L2L ipsec VPN, as the tunnel is not initiating at all... I have ASA on the A-end and PIX on B-end. The ASA on the A-end is also doing NAT of both source and destination and it is also tunnel endpoint.
the topology is like this. Note the LAN addresses specified are not directly connected but behind the ASA and PIX
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...