I purchase four cisco router 1841 and four isdn BRI for cisco router for connecting diffrent four location through ISDN Phone line.
Sir help me how to configure ethernet 0/0, bri0/0/0 and Dialer profile.
Please send me compliter Script for my location for router above.sir, we want to each one comunicate to other three but only one connection establised to each one at a time.sir, please send me scrip accoding to above .
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...