Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ISDN connection fail

Hi experts, I have an ISDN connection and tried to activate it by dial test, but the test is fail and found the following message, can anyone help?

Jun 12 08:35:09: BR1/0 DDR: Attempting to dial 0112223334445

Jun 12 08:35:09: ISDN BR1/0 Q921: User TX -> INFO sapi=0 tei=64, ns=4 nr=8

Jun 12 08:35:09: ISDN BR1/0 Q931: SETUP pd = 8 callref = 0x72

Bearer Capability i = 0x8890

Standard = CCITT

Transer Capability = Unrestricted Digital

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x83

Keypad Facility i = '0112223334445'

Jun 12 08:35:09: ISDN BR1/0 Q921: User RX <- RR sapi=0 tei=64 nr=5

Jun 12 08:35:10: ISDN BR1/0 Q921: User RX <- INFO sapi=0 tei=64, ns=8 nr=5

Jun 12 08:35:10: ISDN BR1/0 Q931: RELEASE_COMP pd = 8 callref = 0xF2

Cause i = 0x82B2 - Requested facility not subscribed

Jun 12 08:35:10: ISDN BR1/0 Q921: User TX -> RR sapi=0 tei=64 nr=9

Jun 12 08:35:10: ISDN Error: Invalid DSL (13) **ERROR**: CCBNI1_CallOriginate: Setup was rejected, cause = 50

Jun 12 08:35:10: ISDN BR1/0 **ERROR**: host_disconnect_ack: Unfound B-channel on Disconnect_Ack call id 0x8529

Jun 12 08:35:11: ISDN BR1/0 Q921: User RX <- IDCKRQ ri=0 ai=127

Jun 12 08:35:11: ISDN BR1/0 Q921: User TX -> IDCKRP ri=21293 ai=64

Jun 12 08:35:12: ISDN BR1/0 Q921: User RX <- IDCKRQ ri=0 ai=127

Jun 12 08:35:12: ISDN BR1/0 Q921: User TX -> IDCKRP ri=34302 ai=64

Jun 12 08:35:39: BRI1/0: wait for isdn carrier timeout, call id=0x8529

Jun 12 08:35:39: ISDN BR1/0 **ERROR**: CCBRI_Go: NO CCB Src->HOST call id 0x8529, event 0x5 ces 1

5 REPLIES
Hall of Fame Super Gold

Re: ISDN connection fail

Where are you located?

Why did you set an american switch type ?

New Member

Re: ISDN connection fail

You are correct, the call test is made from the switch which is located in US.

Hall of Fame Super Gold

Re: ISDN connection fail

Change switch type, it is not the correct type.

New Member

Re: ISDN connection fail

My configuration is using "basic-ni" right now, do you think the correct setting should be "basic-5ess"?

Thanks!

Hall of Fame Super Gold

Re: ISDN connection fail

Or basic-net3 maybe.

754
Views
0
Helpful
5
Replies
CreatePlease login to create content