Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

ISDN connection problem

Hi,

I've read all the forum messages about my problem someone have the same problem but nobody answer the good answer :-)

Tickets have been open from my Cisco contract at TAC services but answers are allways the same : "give me the debug ..."

I'll give you all the elements in this forum and hope someone could help me.

I just want my ISDN connection going up

-----------

THE PROBLEM

-----------

SDSL-878#isdn test call interface bri 0 0170131555

SDSL-878#

*Mar 3 18:53:44.163: ISDN BR0 EVENT: UserIdle: callid 0x8001 received ISDN_CALL (0x0)

*Mar 3 18:53:44.163: ISDN BR0 **ERROR**: process_bri_call: Outgoing call id 0x8001 blocked

*Mar 3 18:53:44.163: ISDN BR0 **ERROR**: UserIdle: process_bri_call failed on call to 0170131555

*Mar 3 18:53:45.083: ISDN BR0 Q921: User TX -> RRp sapi=0 tei=99 nr=0

*Mar 3 18:53:45.087: ISDN BR0 Q921: User RX <- RRp sapi=0 tei=99 nr=0

*Mar 3 18:53:45.087: ISDN BR0 Q921: User TX -> RRf sapi=0 tei=99 nr=0

*Mar 3 18:53:45.099: ISDN BR0 Q921: User RX <- RRf sapi=0 tei=99 nr=0

*Mar 3 18:53:55.099: ISDN BR0 Q921: User TX -> RRp sapi=0 tei=99 nr=0

*Mar 3 18:53:55.103: ISDN BR0 Q921: User RX <- RRp sapi=0 tei=99 nr=0

*Mar 3 18:53:55.103: ISDN BR0 Q921: User TX -> RRf sapi=0 tei=99 nr=0

*Mar 3 18:53:55.127: ISDN BR0 Q921: User RX <- RRf sapi=0 tei=99 nr=0

*Mar 3 18:54:05.123: ISDN BR0 Q921: User RX <- RRp sapi=0 tei=99 nr=0

*Mar 3 18:54:05.123: ISDN BR0 Q921: User TX -> RRf sapi=0 tei=99 nr=0

*Mar 3 18:54:14.163: ISDN BR0 EVENT: UserIdle: callid 0x8001 received ISDN_HANGUP (0x1)

*Mar 3 18:54:14.163: ISDN BR0 EVENT: isdn_hangup: Hangup call to call id 0x8001 ces = 1

*Mar 3 18:54:14.163: ISDN BR0 CC: CCBRI_Go: source id 0x500, state 0, call id 0x0, event 0x5

*Mar 3 18:54:14.163: ISDN BR0 **ERROR**: CCBRI_Go: NO CCB Src->HOST call id 0x8001, event 0x5 ces 1

*Mar 3 18:54:14.163: ISDN BR0 EVENT: process_rxstate: ces/callid 1/0x8001 calltype 1 HOST_QUERY_RESPONSE

My router : Cisco 878

My IOS : c870-adventerprisek9-mz.124-9.T.bin

Here is another debug :

SDSL-878#sh isdn status

Global ISDN Switchtype = vn3

ISDN BRI0 interface

dsl 0, interface ISDN Switchtype = vn3

Layer 1 Status:

ACTIVE

Layer 2 Status:

TEI = 99, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED

Layer 3 Status:

0 Active Layer 3 Call(s)

Active dsl 0 CCBs = 0

The Free Channel Mask: 0x80000003

Total Allocated ISDN CCBs = 0

Thanks for your help !

2 REPLIES

Re: ISDN connection problem

New Member

Re: ISDN connection problem

Hi, thank you for your answer but the Senior engineers confirm that 878 doesn't allow callout from ISDN interface. It only allow the callin for management.

I need to change my 878 for a 1803 ;-)

Thank you for your help.

197
Views
4
Helpful
2
Replies
CreatePlease to create content