Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ISDN dsl errors

My c876 router logs the following errors:

*Apr 14 10:24:46.943: esw_dtc_ltc4258_reg_write: no acknowlege from POE

*Apr 14 10:24:46.943: esw_mrvl_pdc_hardware_config failed on slot 0/0

*Apr 14 10:24:48.451: esw_dtc_ltc4258_reg_write: no acknowlege from POE

*Apr 14 10:24:48.451: esw_mrvl_pdc_hardware_config failed on slot 0/0

Slot 0/0 contains an ATM interface with adsl module. The ATM module is configured like this:

interface ATM0

no ip address

ip verify unicast reverse-path

no ip redirects

no ip unreachables

no ip route-cache cef

no ip route-cache

no atm ilmi-keepalive

pvc 0 8/48

encapsulation aal5mux ppp dialer

dialer pool-member 1

!

dsl operating-mode auto

The ATM interface also keeps restarting every few hours.

Is my hardware failing or is there some other solution?

2 REPLIES

Re: ISDN dsl errors

Hello Remco,

can you post your full configuration, as well as the output of 'show version' ?

Groetjes,

GNT

New Member

Re: ISDN dsl errors

I rater not post the full configuration to a public forum.

This is the output of 'show version'

Cisco IOS Software, C870 Software (C870-ADVENTERPRISEK9-M), Version 12.3(8)YI1, RELEASE SOFTWARE (fc1)

Synched to technology version 12.3(10.3)T2

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2005 by Cisco Systems, Inc.

Compiled Fri 22-Apr-05 14:58 by ealyon

ROM: System Bootstrap, Version 12.3(8r)YI1, RELEASE SOFTWARE

ROM: Cisco IOS Software, C870 Software (C870-ADVENTERPRISEK9-M), Version 12.3(8)YI1, RELEASE SOFTWARE (fc1)

weesp-studio11 uptime is 1 week, 1 hour, 51 minutes

System returned to ROM by power-on

System restarted at 13:45:14 MET Tue Apr 18 2006

System image file is "flash:c870-adventerprisek9-mz.123-8.YI1.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco 876 (MPC8272) processor (revision 0x100) with 118784K/12288K bytes of memory.

Processor board ID FHK092312HL

MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10

4 FastEthernet interfaces

1 ISDN Basic Rate interface

1 ATM interface

128K bytes of non-volatile configuration memory.

28672K bytes of processor board System flash (Intel Strataflash)

Configuration register is 0x2102

320
Views
0
Helpful
2
Replies