Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

ISDN wont accept dial in

I have a Cisco 2811 router with 1 ISDN BRI

I've tried to set it up to accept incoming modem dial in but only to receive this message.

BR0/0/0 **ERROR**: accept_incoming_csm_call: modem problem Bearer capability not available(0x3A): b channel 0, call id 0x22

003132: *May 22 18:10:20.104: ISDN BR0/0/0 **ERROR**: host_disconnect_ack: VOICE ERROR: Bearer capability not available(0x3A): b channel 0, call id 0x22

I've already added 'isdn incoming-voice modem' to my BRI, but it still does not work. What could be the issue?

1 ACCEPTED SOLUTION

Accepted Solutions
Community Member

Re: ISDN wont accept dial in

Hello fahmyaziz,

a standard Cisco ISDN BRI don?t accept modem calls.

If you want to connect with modem on an ISDN BRI you will need a "NM-BRI". The only Cisco routers

that support digital modems over BRI are the 3600/3700 with NM BRIs

and NM-CT1/CE1.

Kind regards,

Christian

3 REPLIES
Community Member

Re: ISDN wont accept dial in

Hello fahmyaziz,

a standard Cisco ISDN BRI don?t accept modem calls.

If you want to connect with modem on an ISDN BRI you will need a "NM-BRI". The only Cisco routers

that support digital modems over BRI are the 3600/3700 with NM BRIs

and NM-CT1/CE1.

Kind regards,

Christian

Community Member

Re: ISDN wont accept dial in

Thanks Christian. Guess I'll be needing one of those routers. Cheers

Community Member

Re: ISDN wont accept dial in

Thank you for rating ;)

1187
Views
0
Helpful
3
Replies
CreatePlease to create content