I use an AS5300 with 240 mica modems and sometimes when I need to turn off the power after I turn it on again not all the modems seems to start correctly. Most of them fail in the C state when I am dialing out. And surprisedly they start to work again after some days with the power on.
I tried to reset them, reload the firmware, and another maintenance commands.
But nothing seems to work just time to them "warm".
Reload the router. When the router reloads, it loads the latest version of available portware. Therefore, if multiple versions of portware are stored in flash, the router loads only the latest version. This includes the portware bundled with the Cisco IOS software.
Note: If the version bundled with Cisco IOS is later than the version in flash, the router loads the portware bundled with Cisco IOS instead of the portware saved in flash.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.