Re: ML PPP problems - can't connect two routers over ISDN
Thanks for all the help. I didn't mention all the details because I didn't want to overload the post. :) The access router servers as a backup "collector" i.e. we have some 50 routers connected over frame relay links, with isdn backups. So, there are specific reasons for the commands you mentioned.
But, as I was searching the web for the solution, some guys enlightened my brain quite a bit. MLPPP is absolutely not required of you have cisco gear exclusively - and we do. So, I removed multilink commands, shortened the load-interval command, and used plain old BOD functionality. And now it works like a charm. :)
I don't know what happened, I tried debug ppp negotiation and authentication, and there's nothing wrong with these guys.
My guess it has something to do with the change of IOS in my calling router. Before the upgrade, MLPPP worked. Afterwards - nope.
Anyway, I'm not going to dig deeper into this, because I already wasted many hours debugging it. :)
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.