03-28-2006 06:30 AM
Hi, is it possible to connect a modem to a ATA 186.
Thanks
-Paul
03-30-2006 08:30 PM
It is possible to connect a modem to an ATA & make calls thru it but it is not suported
http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_qanda_item09186a00800946e1.shtml
03-31-2006 11:01 AM
In using both ATA's and an FXS24 blade for hooking up a modem, I found max speed of connection was 33.6 at best(usually more like ~20kbps). Encrypted traffic over this connection would often fail. Specifically VPN connections would work, but with frequent disconnects.
Configure the ATA as if you were doing faxing:
http://www.cisco.com/warp/public/788/ata-fax.html
From Cisco docs:
"Success of fax transmissions up to 14.4 kbps depends on network conditions and fax modem/fax machine tolerance to those conditions. Network must have reasonably low network jitter, network delay, and packet loss rate."
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: