Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ms pptp client to pix 501

I connect to the pix via pptp and vpdn setup, but the default gateway is missing for the ppp interface -

PPP adapter ocp:

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : ocp

Physical Address. . . . . . . . . :

DHCP Enabled. . . . . . . . . . . : No

Autoconfiguration Enabled . . . . : Yes

IPv4 Address. . . . . . . . . . . : 192.168.2.10(Preferred)

Subnet Mask . . . . . . . . . . . : 255.255.255.255

Default Gateway . . . . . . . . . :

DNS Servers . . . . . . . . . . . : 192.168.1.2

Primary WINS Server . . . . . . . : 192.168.1.2

NetBIOS over Tcpip. . . . . . . . : Enabled

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . : Susan1

Description . . . . . . . . . . . : Intel(R) PRO/Wireless 2200BG Network Connection

Physical Address. . . . . . . . . : 00-15-00-3A-37-5D

DHCP Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

Link-local IPv6 Address . . . . . : fe80::90f6:f171:ad58:3ca8%8(Preferred)

IPv4 Address. . . . . . . . . . . : 192.168.1.112(Preferred)

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Lease Obtained. . . . . . . . . . : Wednesday, August 22, 2007 1:20:07 PM

Lease Expires . . . . . . . . . . : Friday, August 24, 2007 5:08:19 AM

Default Gateway . . . . . . . . . : 192.168.1.1

DHCP Server . . . . . . . . . . . : 192.168.1.1

DHCPv6 IAID . . . . . . . . . . . : 167777536

DNS Servers . . . . . . . . . . . : 4.2.2.2

4.2.2.1

NetBIOS over Tcpip. . . . . . . . : Enabled

and the route for the .2 network is the outside interface of the pix -

IPv4 Route Table

===========================================================================

Active Routes:

Network Destination Netmask Gateway Interface Metric

0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.112 25

70.169.230.65 255.255.255.255 192.168.1.1 192.168.1.112 26

127.0.0.0 255.0.0.0 On-link 127.0.0.1 306

127.0.0.1 255.255.255.255 On-link 127.0.0.1 306

127.255.255.255 255.255.255.255 On-link 127.0.0.1 306

192.168.1.0 255.255.255.0 On-link 192.168.1.112 281

192.168.1.112 255.255.255.255 On-link 192.168.1.112 281

192.168.1.255 255.255.255.255 On-link 192.168.1.112 281

192.168.2.0 255.255.255.0 70.169.230.65 192.168.2.10 26

192.168.2.10 255.255.255.255 On-link 192.168.2.10 281

224.0.0.0 240.0.0.0 On-link 127.0.0.1 306

224.0.0.0 240.0.0.0 On-link 192.168.1.112 281

255.255.255.255 255.255.255.255 On-link 127.0.0.1 306

255.255.255.255 255.255.255.255 On-link 192.168.1.112 281

255.255.255.255 255.255.255.255 On-link 192.168.2.10 281

===========================================================================

both networks are 192.168.1.x, home and office. What can I do?

1 REPLY
Silver

Re: ms pptp client to pix 501

Please click the following URL which will teach you how to configure PIX 01 as PPPoE client

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00801055dd.shtml#table2

226
Views
0
Helpful
1
Replies
CreatePlease to create content