If I have multiple entries in my dialer watch-list:
dialer watch-list 1 ip 192.168.10.3 255.255.255.255
dialer watch-list 1 ip 192.168.20.3 255.255.255.255
And just one of the routes gets removed (for example 192.168.10.3) - will this trigger my router to dial the backup link? OR Do both the routes have to be removed before the router will dial?
(Just a little background - the host routes I'm watching are loopback interfaces of head-end MPLS routers and I'd only like the remote router with the dialer watch-list to dial if BOTH loopbacks are removed from the routing table)
In my limited experience with dialer watch, I believe that you are going to get the results that you want. Dialer Watch will initiate the backup when all of the specified routes are removed from the routing table.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.