Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Multisite Redundancy for Internet Traffic

Dear All,

We have has two office with Dual Internet Links at both the locations

Both the office are also connected over dual DS3 links for data replication.

All the four internet links (Two each from office1 and office2) are in active mode.

There are four IP Blocks of /25 running individually on each link.

Requirement is to segragate the LAN traffic of browsing (To Public cloud) and incoming web server access

(from Public cloud) to run on different links at both the offices.

e.g Office1 has got two links:-

In Normal Scenario - Link1 should be used for browsing only

Link2 should be used for Web access incoming traffic only

In case Link1 fails - Link2 should carry both browsing (Outgoing) and web access (Incoming) traffic.

Same should be true for Link1 if Link1 fails

Scenario2 - When both the Links (Link1 and Link2) of Office1 fails traffic (Browsing and web access)

should flow on the DS3 link to Office2 and should start working from there.

Same scenario should be possible for any link failure in Office2 also.

i.e If both the links fail in Office2 traffic should be routed from Office1 internet links.

All the internet links are having ethernet interface as the handoff.

Pls advice with example how can we achieve this type of configuration....(Will it be PBR+BGP or PBR+GRE+Floating Static route or -----?)

Attached architecture for reference.



Re: Multisite Redundancy for Internet Traffic

In multisite failover designs, traffic is sent to one of the other data centers owned by the service provider. Traffic should be diverted to the alternate only if the primary site is completely unavailable, either because of failure or because its capacity has been exceeded. The Cisco IOS SLB Backup ServerFarm feature provides the support necessary to achieve this

CreatePlease login to create content