Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Network Camera Access Via Internet

I have a d-link network camara. I connect it to my FE04 router (1811). How do I setup to have my people access to this camera by having them to enter ip address in internet with userid and password?

5 REPLIES
Hall of Fame Super Gold

Re: Network Camera Access Via Internet

If it works as web server, configure a static nat translation:

ip nat inside source static tcp

80 interface 800

I've put 800 as external port address so you can use 80 for router management if you want.

Then you can configure dynamic dns in the router so you always reach it.

Hope this helps, please rate post if it does!

New Member

Re: Network Camera Access Via Internet

how do I setup to have outside user enter userid and password before they can see my net camera?

Hall of Fame Super Gold

Re: Network Camera Access Via Internet

Sorry, that is not supported. You have to rely on some PC software for that.

New Member

Re: Network Camera Access Via Internet

I got it to work, but user from outside and they want access to my camera, they have to enter as below: http://x.x.x.x:800

Two questions please:

Is the way I can convert my ip to other DNS?

How do I turn on firewall prevent from other access to my network?

Thanks,

Hall of Fame Super Gold

Re: Network Camera Access Via Internet

dynamic dns:

http://www.cisco.com/en/US/docs/ios/12_4/ip_addr/configuration/guide/ht_ddns.html

As for the firewall, nobody can access your network because of nat. IOS also has firewall, but in most cases it is not necessary.

Hope this helps, please rate post if it does!

150
Views
5
Helpful
5
Replies