Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

NM-4B-S/T

Hi,

after replacing an old NM-4B-S/T with new one we still have the same problem, i.e. the router Cisco 2811 (revision 53.51) with 249856K/12288K bytes of memory cannot recognize this Network Module. Again we tried this NM in Cisco 2611XM and it works.

IOS Ver. is c2800nm-advsecurityk9-mz.123-11.T5.bin on the 2811. As I earlier said we tested NM slot on the router with other NM (NM-8B-S/T and NM-16A) and they worked.

This is very stressed for us and our customer (this is the third NM-4B-S/T which we got from our distributor) so PLEASE do you have any information about this kind of problem.

I’ll give you an information about this card from the box:

REV: -D0

NM-4B-ST=

Special: 800-01237-03

Serial#: 30755020

2 REPLIES

Re: NM-4B-S/T

Hi

Have you tried opening up a TAC Case with Cisco ?? hope that mite help you to get some clue on this prolonged issue which i have been seeing for quite sometime now..

regds

New Member

Re: NM-4B-S/T

I don't have permission to do it.

248
Views
0
Helpful
2
Replies