Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

No isdn connection , %VIP-3-BADMALUCMD

our client his isdn connection didn't work well .Line is comming up for one second and then going down.We received this message : Jan 20 17:42:21 GMT+1: %VIP-3-BADMALUCMD: slot4: VIP2,

Unsupported MALU command 165, arg=0x4, pascb=0x614DED80.

ROUTER INFORMATION :

sh ver

Cisco IOS Software, RSP Software (RSP-JSV-M), Version 12.4(13.5),

INTERIM SOFTWARE

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Thu 15-Feb-07 00:38 by prod_rel_team

ROM: System Bootstrap, Version 11.1(8)CA1, EARLY DEPLOYMENT

RELEASE SOFTWARE (fc1)

BOOTLDR: RSP Software (RSP-BOOT-M), Version 12.2(37), RELEASE

SOFTWARE (fc1)

BENOSrc01 uptime is 13 weeks, 22 hours, 32 minutes

System returned to ROM by reload at 22:02:41 GMT+1 Thu Apr 5 2007

System restarted at 14:48:17 GMT+1 Sun Oct 21 2007

System image file is "slot0:rsp-jsv-mz.124-13.5.bin"

Last reload reason: Unknown reason

Cisco RSP4 (R5000) processor with 262144K/2072K bytes of memory.

R5000 CPU at 200MHz, Implementation 35, Rev 2.1, 512KB L2 Cache

Last reset from power-on

Chassis Interface.

1 FSIP controller (4 Serial).

2 VIP6-80 RM7000B controllers (2 FastEthernet)(2 Serial)(1 POS).

2 VIP2 controllers (2 FastEthernet)(8 Serial)(2 E1)(2 HSSI).

4 FastEthernet interfaces

76 Serial interfaces

2 HSSI interfaces

1 Packet over SONET interface

123K bytes of NVRAM.

32768K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).

125952K bytes of ATA PCMCIA card at slot 1 (Sector size 512

bytes).

8192K bytes of Flash internal SIMM (Sector size 256K).

Slave in slot 3 is running Cisco IOS Software, RSP Software

(RSP-DW-M), Version 12.4(13.5), INTERIM SOFTWARE

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Thu 15-Feb-07 00:38 by prod_rel_team

Slave: Loaded from system

Slave: Cisco RSP4 (R5000) processor with 262144K bytes of memory.

Configuration register is 0x2102

I know there are bugs in 12.1 but not in a higher release

regards

Dirk

1 REPLY

Re: No isdn connection , %VIP-3-BADMALUCMD

Hi Drik,

You are right.

As per Cisco: %VIP-3-BADMALUCMD: Unsupported MALU command [dec], arg=[hex], pascb=[hex]

Explanation: The Route Processor (RP) or the Route Switch Processor (RSP) has forwarded an unsupported command that the Cisco IOS software does not recognize.

I'll glade if I help u further.

Thanks

Goutam

Pls rate if it works

163
Views
3
Helpful
1
Replies
CreatePlease to create content