Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

old ACS appliance access

Hello everybody,

I have an ACS appliance 1111 installed on HP server. It's installed and I have to CD to make a recovery.

The server starts until arrive at the page where say that ACS i running and you can access via Serial or Browser.

I havn't the IP address to access and the Serial with standard parameters didn't show anything.

Please, anyone can help me how I access to manage this ACS ? I worked on it only on software version


Re: old ACS appliance access

Without assigning the ip address it is not possible to Login into the ACS from remote.

To log on to the Cisco Secure ACS Appliance via a serial console, follow these steps:

Step 1 Establish a serial console connection to the Cisco Secure ACS Appliance. For details, see Establishing a Serial Console Connection.

Step 2 At the login: prompt, enter the Cisco Secure ACS Appliance administrator name.

Step 3 At the password: prompt, enter the Cisco Secure ACS Appliance password.

Result: The system prompt appears in the following form:

Cisco Secure ACS Appliance name

New Member

Re: old ACS appliance access

I'm agree with you, just that I don't have any reply on the serial port.