Out of Band Dial Up... (Regarding Module Support)

[sultan-shaikh]

Hi Friends,

Can I use the PVDM2-12DM module for Out of Band Dial Up management of CPE routers. Dialing to remote connected modem with Call Back function.

Might sound stupid, but I would also like to know whether the same is supported on Japanese PSTN system.

Thanks,

~sultan

[umedryk]

Out-of-band management requires the optional Cisco network management module.

Initiate XMODEM upgrade. Initiate an out-of-band firmware upgrade. The XMODEM protocol is used to perform this upgrade