I know what IOS could terminate PPTP tunnels. And looks like its not support at all making outgoing PPTP tunnels by itself? Could anybody confirm this or point to sample config, I can't find anything related.
Run a batch file (batch.bat) to modify the Microsoft routing to resolve this problem. Delete the default and reinstall the default route (you must know the IP address that the PPTP client was assigned, such as 192.168.1.1).
In this example, the network inside the router is 10.13.1.x.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...