02-16-2006 12:54 PM
Currently we have ADSL line to a pix. Need to connect 2 remote locations to the network through the pix, however both locations use different DSL technologies (1-SDSL, 1-IDSL). Are any configuration changes necessary on the pix in order to use varying DSL technologies?
02-16-2006 01:38 PM
PIX itself does not directly connect to xDSL. You will always need a router or similar to convert to ethernet.
DSL is only used in the local loop. Except for available bandwidth there is no end-to-end effect on the use of a specific kind of DSL.
Hope this answers your question.
Regards,
Leo
02-16-2006 02:55 PM
Thanks for responding. Your response was a great help. You stated "Except for available bandwidth there is no end-to-end effect on the use of a specific kind of DSL." With that said, is it safe to say that the same configs used on a PIX connecting to a ADSL line can be used on a PIX connecting to a SDSL/IDSL line?
02-16-2006 10:48 PM
Yes, this will have no effect on the pix config.
You have to adjust the ip adresses & routes correctly of course but when using a template, there are no conceptual differences.
Regards,
Leo
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide