Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PPPoE on routers ethernet

I have a 2600 with 1 serial for internet, and i have a ADSL circuit which i want to use as backup for serial interface.

is it possible? configuring dialer int and binding it to FE. i dont have specific adsl hardware on router.

how can i configure pppoe connection on router which in connected to the adsl modem on same ethernet interface (using a switch lan and adsl both are on routers FE int).

1 REPLY
New Member

Re: PPPoE on routers ethernet

Hi,

something like:

vpdn enable

!

vpdn-group PPPoE

request dialin

protocol pppoe

!

interface Ethernet0

no ip address

pppoe enable

pppoe-client dial-pool-number 1

!

interface Dialer1

ip address negotiated

ip mtu 1456

encapsulation ppp

dialer pool 1

dialer-group 1

ppp authentication chap callin

ppp chap hostname

ppp chap password 0

!

dialer-list 1 protocol ip permit

should work.

regards

Mark

131
Views
0
Helpful
1
Replies