I am configuring Cisco 1801 Router for internet connectivity. The ISP has given a Ethernet connection. I have to dial up by a pppoe connection. I have created the dialer and done the rest of the configuration. The router is trying to establish connection with the ISP's RAS however authentication is failing. According to the ISP I need to configure a PPPOE service name for the authentication to be successful. However I am unable to locate this option in the Cisco 1801. This connection is working OK on a Windows 2000 Machine.
Could somebody tell me if this option is available for configuration on the cisco 1801
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...