PPPoE wont connect

[plexter2k]

Hello,

I am trying to figure out how to get my router to initiate a PPPoE connection to my ADSL modem which was provided by my ISP.

RouterE0/1-->modem-->internet

For some reason it doesnt connect.

I get this (with debug ppp auth and dialer on):

00:48:18: %DIALER-6-BIND: Interface Vi1 bound to profile Di1

00:48:18: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up

00:48:18: Vi1 DDR: Dialer statechange to up

00:48:18: Vi1 PPP: Treating connection as a callout

00:48:18: Vi1 PPP: Authorization NOT required

00:48:18: %DIALER-6-UNBIND: Interface Vi1 unbound from profile Di1

00:48:18: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to down

Says something about authorization not required???

Anyone have any advice that you could please help me with?

Thanks

[globalnettech]

Hello,

make sure that your authentication statement looks like this:

ppp authentication pap chap callin

ppp chap hostname USER

ppp chap password PASSWORD

ppp pap sent-username USER password PASSWORD

If you have that configured correctly, can you post the configuration of your router ?

Regards,

GNT

[nguforbih_nancy]

hi,

i had the same problem for about 2 days and the best way i thought i couold solve it was to use the SDM and configure the router. I did just this and now my connectivity tests are succesfull but i cannot connect to the internet form my workstation through the router(cisco 1841).

Maybe you too should try that .

Thanks.