Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PPTP & QoS using Local AAA Server

Hi all,

How can I use a Cisco router as PPTP-Calls terminator without using a RADIUS server? Right now I came up with the following configuration that works partially:

version 12.4

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

aaa new-model

aaa authentication login default local

aaa authentication login PPTP-Authentication local

aaa authentication ppp PPTP-Authentication local

aaa authorization network PPTP-Authentication local

aaa attribute list 50K-Limit

attribute type sub-policy-out "50K-Limit" service vpdn

aaa session-id common

ip cef

vpdn enable

vpdn authen-before-forward

vpdn-group DefaultVPDN

! Default PPTP VPDN group

accept-dialin

protocol pptp

virtual-template 1

local name PPTP-Authentication

username test1 password 0 test1

username test1 aaa attribute list 50K-Limit

policy-map 50K-Limit

class class-default

bandwidth 50

interface Ethernet0

description LAN Interface

interface Virtual-Template1

ip unnumbered Ethernet0

ip nat inside

ip virtual-reassembly

peer default ip address pool DIAL-IN

vpdn authorization PPTP-Authentication

ppp encrypt mppe auto required

ppp authentication ms-chap ms-chap-v2

ip local pool DIAL-IN 192.168.0.1 192.168.3.254

*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

PPTP works just fine, all users are able to connect BUT - There is no policy-map attached to any of those VI's.

How can I attach a policy-map to local users using local AAA server?

Regards,

Alex.

1 REPLY
Anonymous
N/A

Re: PPTP & QoS using Local AAA Server

What router sereis are you using? What is the version of IOS running on the rotuer?

467
Views
0
Helpful
1
Replies