cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
477
Views
0
Helpful
2
Replies

Problem making ISDN call

yaminqureshi
Level 1
Level 1

Hi,

I am using ISDN, on initiating the call I am getting following error, it appears like the call is initiated for a while (1 or 2 secs) and then hangs up with message "Normal call clearing".

I appreciate any suggestions, as why this problem is occuring, I turned on debug PPP authentication and negotiation are successfull.

Could this be a telco problem?

Aug 6 08:58:59.037 UTC: ISDN Se1/0:23 Q931: RX <- CONNECT pd = 8 callref = 0x96C4

Aug 6 08:58:59.049 UTC: %DIALER-6-BIND: Interface Se1/0:21 bound to profile Di21

Aug 6 08:58:59.049 UTC: %ISDN-6-CONNECT: Interface Serial1/0:21 is now connected to 0667723420 N/A

Aug 6 08:58:59.053 UTC: ISDN Se1/0:23 Q931: TX -> CONNECT_ACK pd = 8 callref = 0x16C4

Aug 6 08:58:59.213 UTC: ISDN Se1/0:23 Q931: TX -> DISCONNECT pd = 8 callref = 0x16C4

Cause i = 0x8090 - Normal call clearing

Aug 6 08:58:59.313 UTC: ISDN Se1/0:23 Q931: RX <- RELEASE pd = 8 callref = 0x96C4

Thanks

Yamin

2 Replies 2

bmbreer
Level 1
Level 1

Post the config so we can properly troubleshoot.

Yamin

I agree that seeing the config might help us to find the issue. I would also suggest that it might be helpful if you would run debug isdn q931 and possibly debug ppp negotiation and post the output of the debug.

HTH

Rick

HTH

Rick
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: