Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problem with remote access to ISDN Router

Hello,

I have the current setup:

PC->ISDN modem->PSTN->PBX->MGCP Voice gateway-> CCM -> H323 Voice Gateway w/vwic-2bri-nt/te->ISDN router

When i try to dialin to the ISDN Router from the PC I see the call made successfully but disconnects after 10 seconds and i'm not able to authenticate with the ISDN Router.

In attach is the debug q931 output. Has anybody seen this before?

Thanks in advance,

Vasco

2 REPLIES
Hall of Fame Super Gold

Re: Problem with remote access to ISDN Router

I don't think you can get this to work with mgcp. You may have better chances using H.323 instead and if the hardware allows you, configure a dial-peer data as the newest IOS allows.

New Member

Re: Problem with remote access to ISDN Router

How do i use the data dial-peer?

Can i assign a port to it?

Thanks

175
Views
0
Helpful
2
Replies
CreatePlease to create content