Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

QoS on PPPoE setup.

Hello,

I'm trying to setup a QoS policy on my ADSL connection. I have a separate dsl modem in bridging mode (no cisco) and a 2800 router.

What I'm not sure about is if I should attach the service-policy to the Dialer interface of the actual physical Gi0/1 interface?

Most of the documents talk about ATM interfaces and they put the service-policy on the pvc, but I'm not able to find anything on the Ethernet.

Any suggestions?

Thank you,

1 REPLY
Hall of Fame Super Gold

Re: QoS on PPPoE setup.

Hi,

best would be for you to aquire an HWIC-1ADSL or WIC-1ADSL to connected directly the ADSL circuit and be guaranteed that everything works nicely.

However, if you cannot do that, here is a configuration example for a nested policy-map that first shapes and then applies priority:

http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a00800b2d29.shtml

Hope this helps, please rate post if it does!

283
Views
4
Helpful
1
Replies
CreatePlease login to create content