Radius for 802.1x; Remote Access and Wireless authentication

[richard.whitlock]

Looking to use a single Radius platform for authenticating Remote, wired and wireless users and machines. Anyone with some experience with that use to share some lessons learns...

[Georg Pauwen]

Hello Richard,

there is a previous post from a user who wants to add authentication to his Cisco ACS Radius server for wireless clients, it might be worth contacting that user to see how he resolved this...here is the link to the thread:

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Getting%20Started%20with%20LANs&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd9504e

Also, have a look at the document below, which talks about the issue:

Selecting an EAP Method: the RADIUS Authentication Server Component

http://www.interlinknetworks.com/news/newsletters/20031104/tech.htm

HTH,

GP

[richard.whitlock]

Thanks....next issue...Wired infrastructure (802.1x, radius and AD authentication works) In adding wireless clients to the mix.....Preshared Key works but when using 802.1x user authentication works, machine does not, and DHCP address is not getting passed...anythoughts?