Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Radius for 802.1x; Remote Access and Wireless authentication

Looking to use a single Radius platform for authenticating Remote, wired and wireless users and machines. Anyone with some experience with that use to share some lessons learns...

2 REPLIES
VIP Purple

Re: Radius for 802.1x; Remote Access and Wireless authentication

Hello Richard,

there is a previous post from a user who wants to add authentication to his Cisco ACS Radius server for wireless clients, it might be worth contacting that user to see how he resolved this...here is the link to the thread:

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Getting%20Started%20with%20LANs&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd9504e

Also, have a look at the document below, which talks about the issue:

Selecting an EAP Method: the RADIUS Authentication Server Component

http://www.interlinknetworks.com/news/newsletters/20031104/tech.htm

HTH,

GP

New Member

Re: Radius for 802.1x; Remote Access and Wireless authentication

Thanks....next issue...Wired infrastructure (802.1x, radius and AD authentication works) In adding wireless clients to the mix.....Preshared Key works but when using 802.1x user authentication works, machine does not, and DHCP address is not getting passed...anythoughts?

154
Views
0
Helpful
2
Replies