Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

RDP over Internet to 2851 help needed.

I am working from home and need sound from my office PC and I don't want to purchase a program.  Right now I am using the free version of LogMeIn and it works great except there is no sound.  I would like to be able to connect from my home PC on Comcast (no Cisco stuff here) to my office PC via RDP.

We have a public IP and my PC has a 192.168.10.0 address.  Can I use port forwarding to acomplish this?  If so, what commands do I need to enter on the 2851?  I have full access to the router.

My config is attached

2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

RDP over Internet to 2851 help needed.

Here is the command for your reference:

ip nat inside source static tcp 192.168.10.x 3389 interface FastEthernet0/0 3389

Hope that helps.

Cisco Employee

RDP over Internet to 2851 help needed.

You can either change the RDP port to a different port, or alternatively, if you have spare public IP, then you can use that spare IP for NATing.

6 REPLIES
Cisco Employee

RDP over Internet to 2851 help needed.

Here is the command for your reference:

ip nat inside source static tcp 192.168.10.x 3389 interface FastEthernet0/0 3389

Hope that helps.

New Member

RDP over Internet to 2851 help needed.

You ROCK!!!  THANK YOU!!!!!

Works perfectly.   I am going to have to change my PC to a static IP nut that is not big deal.

Again,  Thanks.

Cisco Employee

RDP over Internet to 2851 help needed.

Great to hear it's all good. Thanks for the update and ratings.

New Member

RDP over Internet to 2851 help needed.

One more question.   Now that I can access my desktop computer at the office, the boss' wife would like to be able to do the same.  any suggewstions on how we both can remote at the same time?  Would I have to change the rdp port on one of the systems?  Or is there a better/different way to do this?

Cisco Employee

RDP over Internet to 2851 help needed.

You can either change the RDP port to a different port, or alternatively, if you have spare public IP, then you can use that spare IP for NATing.

New Member

RDP over Internet to 2851 help needed.

Thanks you

420
Views
0
Helpful
6
Replies
CreatePlease to create content