On the router there is PBR configured because of multihoming. Now when remote users connect via VPN they connect fine but are not able to access any resources due to the fact that the traffic is PBR to one ISP but not to the other (internet only traffic). This PBR needs to remain in place. Is there a way to exclude VPN users from the PBR?
users connect fine, when coming from both ISP's but when a remote user connects it can come from anywhere, access to the resources works if coming from ISP 1 but not from the other one (and this should be ISP x because this should be any ISP worldwide)
PBR is set to route traffic from certain servers via ISP 1, ISP 2 is used for internet access
Does anyone have a solution for this? I am running into a similiar situation. I have a 2911 with 2 ISPs. ISP1 is for internet traffic only, ISP2 is for remote locations connected via Tunnels. When I connect via Remote VPN, I connect, but can not access ANY resource.
Remote VPN has unique network, 172.27.0.0/24
172.27.0.0/24 is excluded from PBR ACLs
Remote VPN is setup on ISP2 - Same as the VPN Tunnels.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.