Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Remote access VPN using ASA 5510

(diagram attached).I configured cisco ASA 5510 for remote access vpn. User can access server from internet. It is working well. When any user tried through CDMA 2000 1x technology (internet), he is able to get connected but can not telnet or remote desktop. Do you think any configuration needed for CDMA in ASA or not? Can you give me the solution?

4 REPLIES
New Member

Re: Remote access VPN using ASA 5510

Diagram shows ASA5510 and connected server. User can access server through internet. But cannot using CDMA 2000 1x technology.

Gold

Re: Remote access VPN using ASA 5510

Sounds like MTU issue - Can you ping from the host to the server???

You can try ajust MTU settings on outside interface

ASA(config)# mtu Outside 1300

Let us know the result

M.

hope that helps rate if it does

New Member

Re: Remote access VPN using ASA 5510

No I cannot ping the server when I connected through CDMA.

But, in GSM technology and Dial-up internet, it is possible to ping, remote desktop and telnet also.

MTU is running with 1500

New Member

Re: Remote access VPN using ASA 5510

Now mtu is running with 1300. Still having the same problem.

208
Views
0
Helpful
4
Replies