Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

remote access with 3845

Hi,

i want a confirmation that Cisco 3845 ISR with NM-16AM-V2 and NM-1CE1T1-PRI card can be configured as a remote access serveur in order to permit remote client access through isdn and pstn.

Regards

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: remote access with 3845

For modem access via PRI you also need PVDM2-DMxx where x is the number of simultaneous calls you need (avail 8, 16 and 32).

The NM-16AM-V2 instead has internal modems using analog lines and is not needed if using PRI exclusively.

Hope this helps, please rate post if it does!

2 REPLIES
Hall of Fame Super Gold

Re: remote access with 3845

For modem access via PRI you also need PVDM2-DMxx where x is the number of simultaneous calls you need (avail 8, 16 and 32).

The NM-16AM-V2 instead has internal modems using analog lines and is not needed if using PRI exclusively.

Hope this helps, please rate post if it does!

New Member

Re: remote access with 3845

Ok. Thanks a lot

129
Views
0
Helpful
2
Replies