Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

remote connection established - delayed ping responses - why??

When we have established a remote session with Cisco RAS it takes a long time - 30 secs to a minute - until we start to receive ping responses from a server on the network. Any ideas?

3 REPLIES
Bronze

Re: remote connection established - delayed ping responses - why

There is nothing wrong with the configuration because connection is established. With Ping command the normal response occurs in 1 to 10 seconds, depending on network traffic. But in you case it is taking more than 30m sec. this may occur due to big length cable use or traffic. To determine if ping is getting delay looked at the CPU.

New Member

Re: remote connection established - delayed ping responses - why

We have checked CPU which is at around 3% so that should not be causing it.

New Member

Re: remote connection established - delayed ping responses - why

Also you state that with the ping command it is normal not to receive a response within 1 to 10 secs. Why is this?

Thanks

233
Views
0
Helpful
3
Replies