I have a client with a cisco 1603 unit. I am having issues with the password, the previous company that installed this did not give the password to the buisness owner. I have instructions on how to reset this how ever.
I am chasing documentation on how to setup the remote desktop connection (3389) to allow access to there SBS 2003 server from my workplace.
I haven't used cisco based products before nor telnet
The basic way of allowing this is to add the access-list to mathc the traffic. But to understand to what access-list a can you please post the configuration on your router. and also the ip address of the SBS 2003 server and the host subnets that need access to it.
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...