Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Remote desktop through ethernet0/1

Good day, I would apreciate it if somebody would like to help me set up our new router. The ISP is not very helpful. I got it connected to the net with some functionalty but I can not send mail througt the router it sais something like Relay not permited from your location. And i cant seem to get remote desktop working through the Ethernet 0/1 port. I will attach a network diagram with basic information. It any one needs more info I will suply it. PLZ Help.

Thanks

3 REPLIES
New Member

Re: Remote desktop through ethernet0/1

attach your sh run output. If you can't connect with remote desktop outside probably you haven't configured port mapping correctly.

New Member

Re: Remote desktop through ethernet0/1

Here is my running config. (see Attachment)

Thank You

New Member

Re: Remote desktop through ethernet0/1

check you access-list 1 it's incorrect in this part

access-list 1 permit 0.0.0.1 196.25.155.158

make sure access list allow access host from FastEthernet0/1 network translated because this interface is ip nat inside.

148
Views
0
Helpful
3
Replies
CreatePlease to create content