Our organisation is changing the current two vpn concentrators 3000 running remote ipsec with ASA running 8.4(3). Please help to understand how the conversion can be done from concentrator to ASA. some things like load sharing on concentrator, security levels on ASA etc are difficult to convert.
The same remote ipsec vpn has to run on new ASA.
Please help with inputs or some documents. thanks in advance.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...