Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Remote VPN User Changing Password When Connecting via Cisco Anyconnect

Hi All,

I have setup a VPN connection using Cisco Anyconnect with Cisco 5505 and Cisco ACS v5.3. I have created the VPN inside the ACS and I wish to force the user to change the password on their first login. However, the Anyconnect client is not able to force the user to change the password even though I have check the option for the user to change password on first login when I create the user in the ACS. Is there any setting that I will need to configure?

On top of that, I have also read that the changing of the password for the VPN can be achieve with Cisco Anyconnect and a LDAP. Please advice. Please refer to the link below.

https://supportforums.cisco.com/docs/DOC-1361#Q_Can_AnyConnect_or_Clientless_SSL_VPN_users_initiate_passwordmanagementchanges_from_the_AnyConnect_client_itself

Thks and Rgds

1131
Views
0
Helpful
0
Replies