Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

reserved not zero on payload 8

I am getting this error message when i run debug isa sa on my PIX 6.3.4. The Cisco VPN client connects,and I see alot of debug output. The client is hanging at the spot "Securing Communication Channels". That is when I get the debug output of "reserved not zero on payload 8. I had seen "reserved not zero on payload 5" before, but never this...

Can anyone offer suggestions that would be beneficial to this...

thx

2 REPLIES
Cisco Employee

Re: reserved not zero on payload 8

Hi,

Can you make sure that you have a pool of IP Addresses configured on the Pix for the VPN Clients and the Pool is assigned to the group that the VPN Client is connecting to.

Regards,

Arul

New Member

Re: reserved not zero on payload 8

Yes the following is configured on the PIX:

ip local pool ippool 192.168.20.2-192.168.20.10

vpngroup vpn3000 address-pool ippool

thx

201
Views
0
Helpful
2
Replies
CreatePlease to create content