Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Reverse Telnet from AUX->CON port hangs

While trying to r-telnet from the AUX port of a 2811 router to the Console port of a 1751 router, I get prompted for user name and password. If I have just reloaded the router, I can see the boot messages during the r-telnet session. Once the 1751 fully boots, my session locks up and I have to Ctrl+Shift+6+x myself out of it. I've cleared the line several times and tried different configurations and cable types on both ports. Speeds on both ports are set to 9600. I am currently using the following configuration with a rollover cable:

2811 ROUTER

interface Loopback0
ip address 172.16.1.1 255.255.255.0

line aux 0
  modem InOut
transport input all
transport output all

1751 ROUTER

line con 0

1 REPLY

Re: Reverse Telnet from AUX->CON port hangs

try and configure the below on the 1751:

line con 0

password <>

login

1512
Views
0
Helpful
1
Replies
CreatePlease to create content