Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Router and Anyconnect for Public Internet on a Stick

Instead of using the traditional Cisco VPN client software, how to configure this in router with Anyconnect (IOS SSLVPN)?

Ref(Cisco VPN Client): http://www.cisco.com/en/US/products/sw/secursw/ps2308/products_configuration_example09186a008073b06b.shtml

I tried to modify the above using webvpn. But I can only access the internal network, not Internet. Any idea?

webvpn gateway gateway1
ip address 172.16.1.1 port 443
ssl trustpoint TP-self-signed-743123231
inservice
!
webvpn context context1
ssl authenticate verify all
!
policy group policy1
   functions svc-enabled
   svc address-pool "vpnpool"
   svc keep-client-installed
default-group-policy policy1
aaa authentication list localuser
gateway gateway1
inservice

1 REPLY
Cisco Employee

Re: Router and Anyconnect for Public Internet on a Stick

Hi Raymond,

   From your description it seems you do not want to configure split-tunneling to get access to the Internet at the Client's site. Have you configured the NAT on a Stick setup that the link describes to use the tunnel to get Internet access?

Regards,

Rick.

456
Views
0
Helpful
1
Replies
CreatePlease login to create content