Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Same IP Pool with multiple Virtual-templates ...

I am working on my access router for dialup setup. I only wanted to confirm that can we use same IP Pool under different virtual-templates ??

In my setup , I will be having more than 1 tunnels & hence using seprate virtual-template for each tunnel.

config will be like this :

ip local pool VTY_Pool XX.XX.XX.1 XX.XX.XX.254

!

interface Virtual-Template2

peer default ip address pool VTY_Pool

!

interface Virtual-Template3

peer default ip address pool VTY_Pool

!

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Same IP Pool with multiple Virtual-templates ...

This will not be a problem.

You may configure this as proposed.

regards,

Leo

2 REPLIES

Re: Same IP Pool with multiple Virtual-templates ...

This will not be a problem.

You may configure this as proposed.

regards,

Leo

New Member

Re: Same IP Pool with multiple Virtual-templates ...

Hi Leo,

Thks 4 ur reply. So it means its IP Pool responsibility to keep track of free ips or allocated ips..

221
Views
0
Helpful
2
Replies