11-01-2006 03:25 AM
Hi all
I have 2 X cisco SDSL routers with no config.
I need to setup a SDSL point to point connection.
I have a RJ11 cable plugged into both SDSL interfaces - i just need a sample config to continue.
Can anyone help me?
Regards
Malcolm
Solved! Go to Solution.
11-01-2006 04:37 AM
Hello Malcolm,
have a look at this link, it contains full sample configs for an SDSL back-to-back setup:
Configuring CPE Back-to-Back Through G.SHDSL Ports
http://www.cisco.com/en/US/tech/tk175/tk274/technologies_configuration_example09186a0080135834.shtml
HTH,
GNT
11-01-2006 04:37 AM
Hello Malcolm,
have a look at this link, it contains full sample configs for an SDSL back-to-back setup:
Configuring CPE Back-to-Back Through G.SHDSL Ports
http://www.cisco.com/en/US/tech/tk175/tk274/technologies_configuration_example09186a0080135834.shtml
HTH,
GNT
11-01-2006 04:51 AM
hi GNT - Thanks i managed to get it working using that help page.
It was a great help
Regards
Malcolm
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide