Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

serial port on router with 4MB bandwidth

Hi everybody

I know that wic solt has serial port with 2mb speed but someone aksed me about port with 4mb bandwidth .could you pls help me that what module I can select?

thanks

3 REPLIES

Re: serial port on router with 4MB bandwidth

Hello,

what you are looking for is a high speed serial card (HWIC), which support speeds up to 8Mbps. Have a look at the link below, it lists the HWICs for the 1800/2800/3800 series:

http://www.cisco.com/en/US/products/ps5949/products_data_sheet0900aecd80274416.html

HTH,

GNT

Re: serial port on router with 4MB bandwidth

Hi

Which router are you having?

Regards

JD

Re: serial port on router with 4MB bandwidth

For the 72xx routers you can use a PA-4T / PA-4T+ card. This is 4 ports x 2Mbps. It is possible to do "aggregation" there. If you use only 1 port from the entire card, you can set it up to 8Mbps. If you use 2 ports from the card, you can set them to 4Mbps each.

There is a similar card NM-4T for the 36xx series routers.

In several circumstances the WIC-2T card also can support 4Mbps and 8Mbps.

Read this link:

http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a00800b0858.shtml

Do not use X.21. Go for V.35 or RS-449.

That is due to clocking limitations.

263
Views
0
Helpful
3
Replies