I have 2650XM and we are interested in setting it up as our dial-up router using a PRI ISDN circuit. At the moment we are using a 16 port analog modem module installed on a 3661 router for our dialup using AAA and RADIUS.
We would like to change that where we use ISDN PRI at our main site and terminate it on the 2650XM.
I need some pointers on the other equipments (cards) and configuration that I will need so that dialup users using dial into the network and get authenticated using RADIUS
Regarding the configuration, have a look at the sample configuration below (you need the configuration for the ´maui-nas-01´ router), it has RADIUS, a T1, as well as async connectivity, which you probably do not need, so leave the part with the ´Group-Async0´ out.
Thank you GP for the info. Would you be able to tell me whether the 2650XM router will need the digital modems. I believe the 2650XM have only one network module slot which will be used for the E1/PRI network module on this case.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...