Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

site to site, overlap

Dear;

I wana to configure Site-to-Site network but the two local networks are the same subnet.

how can i deal with such issue.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: site to site, overlap

You need to perform NAT, check this link for a sample overlapping network

http://www.cisco.com/warp/public/556/3.html

3 REPLIES

Re: site to site, overlap

You need to perform NAT, check this link for a sample overlapping network

http://www.cisco.com/warp/public/556/3.html

Community Member

Re: site to site, overlap

I have small office;

I already NAT all my devices to the Internet.

but i need to establish a VPN tunnel between with other site with the same local IP addresses.

Green

Re: site to site, overlap

You can have it both ways. Maybe this will explain better. What are the devices?

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800949f1.shtml

148
Views
0
Helpful
3
Replies
CreatePlease to create content