site-to-site with two gateways on host lan

[orlando]

I had a linksys router(remote)-to-pix 515(host) configured that worked beautifully until a router (cisco 871) was added as a second vpn for a particular telnet server within the same subnet on the host side. This server's network gateway ip changed to allow intresting traffic through the 871 router. But now we are not able to telnet into this server through the linksys-pix vpn.

[spremkumar]

Hi Orlando

Do make sure that you have the reachability in the server through the Cisco 871 router so that you can reach the server through the same..

regds

[orlando]

Thanks for the fast response.

I did not mention that we are not supposed to use the 871 for our own vpn. It is stricly intented for other purposes. What is odd is that when i do a pc to pix vpn telnet works fine.