I'm monitoring a set of 3060 concentrators using SNMP but all I'm getting is bandwidth. I would like to know if I can get more information from it like CPU, Load and what ever else I can get from it? What application do you think I would be able to get more information from it.
The Monitoring screen opens when you click Monitoring in the Concentrator Manager table of contents. This section of the Manager lets you view VPN Concentrator status, sessions, statistics, and event logs.
Thanks for the comment, but that is not what I'm looking for. I'm using SNMP to monitor the device but all I can get is bandwidth, I would like to know what other type of information I can get using SNMP and what application you recommend for me to use. I also can not find the MIBS to download and add to SolarWinds Orion.
Is that you?? It's Javier. It's so funny that I saw our post for the concentrators we worked on because I was searching for the same MIB information and I came across your post. If I find it first I will let you know.
.126.96.36.199.4.1.3076.2.1.2.188.8.131.52 - Active Sessions
What you probably want to see as well is active Site-To-Site, you can use this OID:
.184.108.40.206.4.1.3076.2.1.2.220.127.116.11 - Active L2L Sessions
In order to find the OIDs, use the GetIF utility and download the MIB package they have. It is a large zip file and contains all these MIBs too. Use the MIB walker and go down the tree to .iso.org.dod.internet.private.enterprises.altigaRoot.altigaGeneric.altigaMib
Yes it is. How are things? I have downloaded a few MIBs for it but I have yet to try it. I have converted the concentrators to end user VPN's using IPSec and offering WEBSSL connection authenticating to an A10 Box that is tied to AD. So far it's working nice. We may end up with 3 or 4 thousand users.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...