Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

SSL VPN: Anyconnect client fails to install

Hi,

I have a 2801 with 12.4(15)T1 advanced IP servcies image installed.

I can download the Anyconnect client from the WebVPN portal however the isntall fails. The debug from the 2801 gives me the following:

001211: *Dec 4 07:31:26.899 UTC: WV-TUNL: Tunnel CSTP Version recv use 1

001212: *Dec 4 07:31:26.899 UTC: WV-TUNL: Allocating tunl_info

001213: *Dec 4 07:31:26.899 UTC: WV-TUNL: Allocating stc_config

001214: *Dec 4 07:31:26.899 UTC: WV-TUNL: Allocating address 10.12.201.2 from local pool

001215: *Dec 4 07:31:26.899 UTC: WV-TUNL: Cannot find IDB for IP address 10.12.201.2 in table 0

001216: *Dec 4 07:31:26.899 UTC: WV-TUNL: Returning address 10.12.201.2 to pool

001217: *Dec 4 07:31:26.899 UTC: WV-TUNL: Failed to config IP addr (10.12.201.2) to VRF Table (0)

001218: *Dec 4 07:31:26.899 UTC: HTTP/1.1 401 Unauthorized

Can anyone shed some insight into what this debug means?

It's mentioning VRF but I do not have VRF configured and I'm strugglign to understand why I'd need it.

TIA

Scott

1 REPLY
Community Member

Re: SSL VPN: Anyconnect client fails to install

Hi All,

Further to this, I've attempted circumventing this issue by downloading the Anyconnect client and installing it manually on the remote machine.

Now when the machine attempts a conenction (and fails) I see the following debug on the router:

000090: *Dec 5 06:58:17.067 UTC: %SSLVPN-5-HTTP_REQUEST_NOT_AUTHORIZED: vw_ctx: default_context vw_gw: WEBVPNGATE remot

e_ip: 1.1.1.1 status: HTTP request without login cookie resource: /

Now what the heck is that telling me? I thought the authentication cookies were only used when authenticated via the webportal (ie. clientless mode)?

Cheers

Scott

970
Views
0
Helpful
1
Replies
СоздатьДля создания публикации, пожалуйста в систему