Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

STATIC NAT ON CISCO 2811 ISR

I need help urgently.I want to do staic nat so that my boss can view an IP camera via the internet from home.

I have tried using the webvpn and can get the webservers on the portal but it is slow and the live video cannot be processed.I did a static nat ;

ip nat inside source static tcp 192.168.20.9 8081 interface fastethernet0/1 8081

The access-list is ;

access-list 100 permit ip 192.168.20.0 0.0.0.255 any

Please I am in a fix now because of pressure .I need an urgent help !!!!!

Also attached is my config in .txt

Just need help.

1 REPLY

Re: STATIC NAT ON CISCO 2811 ISR

Hi,

I just did a ''telnet 80.87.81.250 8081'' and traffic seems to go through.

The router will receive this traffic and redirect it to internal 192.168.20.9 on port 8081 (where the camera is listening).

Also, if I do http://80.87.81.250:8081 from a browser I get prompted for user/pass.

So, I would say that traffic is passing through the router fine and reaching the internal device.

Federico.

1117
Views
0
Helpful
1
Replies
CreatePlease to create content